AEG C67600K Installation And Operating Instructions Manual

Also see for C67600K: Installation and operating instructions Installation and operating instructions

Contents

52The following letters and functions are displayed only with the two in-duction cooking zones.1 f = Error displayflashes if the cooking zone is activated and– no pan is on the cooking zone or– unsuitable pots and pans are usedp = Power functionlights up when the Power function is activated.The Power function supplies extra-high heating capacity. It can be acti-vated for the front left cooking zone.1 Cooking Zone Safety Cut-outIf one of the cooking zones is not switched off after a certain time or ifthe heat setting is not changed, the corresponding cooking zoneswitches itself off automatically.h appears in the ring display for all rings that are switched on, and _after they have cooled down.The rings are switched off at:3 If one or more cooking zones switch off before the times indicated seesection “What to do if …”.Cancelling the Safety Cut-outTo cancel the activated safety cut-out the appliance must be switchedoff and then on again using the ON/OFF I sensor field. After this thecooking zones are again ready for use.Switching Off for Other ReasonsLiquid that boils over onto the control panel causes all cooking zones toswitch off immediately.If you place a wet cloth on the control panel it has the same effect. Inboth cases the appliance has to be switched on again using the mainsswitch I after removing the liquid or cloth.• Heat setting 1 - 2 after 6 hours• Heat setting 3 - 4 after 5 hours• Heat setting 5 after 4 hours• Heat setting 6 - 9 after 1.5 hours