10 ENMAINTENANCECLEANING THE COMfORT PANELS• Pull the Comfort Panel to open it.• Disconnect the panel from the hood canopy by slidingthe fixing pin lever.• The comfort panel must never be washed in a dish-washer.• Clean the outside by using a damp cloth and neutralliquid detergent.• Clean the inside as well by using a damp cloth andneutral detergent; do not use wet cloths or sponges,or jets of water; do not use abrasive substances.• When the above operation has been completed, hookthe panel back to the hood canopy and close it byturning the knob in the opposite direction.METAL GREASE fILTERSFilters can be washed in the dish machine. They needto be washed when F-sign appears on the display or inany case every 2 months, or even more frequently incase of particularly intensive use of the hood.Alarm reset• Switch off the hood and the lights.• Press the D-key till the display is unlit.Cleaning the filters• Pull the comfort panels to open them.• Remove the filters one by one pushing them towardsthe back side of the hood unit and simultaneouslypulling downwards.• Any kind of bending of the filters has to be avoidedwhen washing them. Before fitting them again intothe hood make sure that they are completely dry.(The colour of the filter surface may change through-out the time but this has no influence to the filterefficiency).• When fitting the filters into the hood pay attentionthat they are mounted in correct position the handlefacing outwards.• Close the comfort panel.