12. Press the handle of the mounting clip onthe filter panel underneath the hood (1).123. Slightly tilt the front of the filterdownwards (2), then pull.Repeat the first two steps for all filters.4. Clean the filters using a sponge with nonabrasive detergents or in a dishwasher.The dishwasher must be set to a lowtemperature and a short cycle. Thegrease filter may discolour, it has noinfluence on the performance of theappliance.5. To mount the filters back follow the firsttwo steps in reverse order.Repeat the steps for all filters if applicable.6.3 Replacing the charcoal filterThe charcoal filter must be replaced if thefilter alarm is on.Refer to the filter notification in daily usechapter for more information aboutfunction.WARNING!The charcoal filter is NON-washable! Thefilter cannot be regenerated!To replace the charcoal filter:1. Remove the grease filters from theappliance.Refer to "Cleaning the grease filter" in thischapter.2. Turn the filter counterclockwise (1) andthen pull (2).12To mount the filters back follow the steps inreverse order.In any case, it is necessary to replace thefilters at least every four months.6.4 Replacing the lampThis appliance is supplied with a LED lampand separate control gear (LED driver).These parts can be replaced by a technicianonly. In case of any malfunction refer to"Service" in the "Safety Instructions" chapter.7. TROUBLESHOOTINGWARNING!Refer to Safety chapters.57