AEG EE1000001 User Manual

Also see for EE1000001: User manual

Contents

AEG EE1000001 User Manual Manual pdf 19 page image

• To clean metal surfaces, use a usualcleaning agent.• Clean the appliance interior after eachuse. Then you can remove dirt moreeasily and it does not burn on.• Clean stubborn dirt with a specialoven cleaner.• Clean all accessories after each useand let them dry. Use a soft cloth withwarm water and a cleaning agent.• If you have nonstick accessories, donot clean them using aggressiveagents, sharp-edged objects or a dish-washer. It can cause damage to thenonstick coating.9.1 Shelf supportsRemoving the shelf supportsYou can remove the shelf supports toclean the side walls.1. Pull the front of the shelf supportaway from the side wall.122. Pull the rear end of the shelf sup-port away from the side wall and re-move it.Installing the shelf supportsInstall the shelf supports in the oppositesequence.Valid for telescopic runners:The retaining pins on the tele-scopic runners must point to thefront.9.2 LampWARNING!There is a risk of electrical shock.The lamp and the lamp glasscover can be hot.Before you change the lamp:• Deactivate the appliance.• Remove the fuses from the fuse box ordeactivate the circuit breaker.CAUTION!Put a cloth on the bottom of theinterior of the appliance. It pre-vents damage to the lamp glasscover and the cavity.Always use the same lamp type.Replacing the lamp at the cavityceiling:1. Turn the lamp glass cover counter-clockwise to remove it.2. Clean the glass cover.ENGLISH 19