AEG Electrolux FAVORIT 60660 User Manual

AEG Electrolux FAVORIT 60660 User Manual Manual pdf 29 page image

WARNING!Warning! Dangerous voltage.Water outlet hose connectionThe end of the drain hose can be connected in the following ways:1. To the sink outlet spigot, securing it to the underside of the work surface. This willprevent waste water from the sink running into the machine.2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.The waste connection must be at a height of be-tween 30 cm (minimum) and 100 cm (maximum)from the bottom of the dishwasher.The drain hose can face either to the right or leftof the dishwasher.Ensure the hose is not bent or squashed as thiscould prevent or slow down the discharge of wa-ter.The sink plug must not be in place when the ma-chine is draining as this could cause the water tosyphon back into the machine.If you use a drain hose extension it must be no longer than 2 metres and its internal diametermust be no smaller than the diameter of the hose provided.Likewise the internal diameter of the couplings used for connections to the waste outletmust be no smaller than the diameter of the hose provided.When connecting the drain hose to an under sinktrap spigot, the entire plastic membrane (A)must be removed . Failure to remove all themembrane will result in food particles building upover time eventually blocking the dishwasherdrain hose spigot.Our appliances are supplied with a security deviceto protect against the return of dirty water backinto the machine. If the spigot of your sink has a"no return valve" incorporated this can preventthe correct draining of your dishwasher. We therefore advise you to remove it.Water connection 29

/ 32

Related manuals for AEG Electrolux FAVORIT 60660