Operating instructions27Starting a washing programmeIn this fully integrated appliance the controls are located on the top ofthe door. When selecting a programme, the door needs to be slightlyopen.1. Check that the baskets have been loadedcorrectly and that the spray arms can rotatefreely2. Turn on the water tap3. Press the On/Off buttonAll the indicator lights of the programme selection buttonsilluminate.4. Setting and starting the programmea) To select a programme, press the programme button of thedesired washing programme (see "Washing programmes" chart).The corresponding indicator light remains illuminated while theother programme buttons indicator lights turn off.In the digital display flashes the running time (in minutes) of theselected programmeb) To select the delay start of the programme, press the"delay start" button until the number of the hours selected forthe delay start, followed by the letter h, will appear in the digitaldisplay (e.g. 1h).The start of the programme or of the countdown for the delay startwill occur only after the closure of the door, until that momentyou can modify the selection made.Close the dishwasher door.a) If delay start has not been set, the programme will startautomatically.b) If delay start has been set, the countdown starts automaticallyand will decrease with steps of 1 hours.The opening of the door will not modify or interrupt thecountdown. Once the delay start has elapsed the programmewill start automatically.152957 46/0en 4-01-2005 12:35 Pagina 27