16Delay Start Timer1. Press the TIME (TIJD) button repeatedly until the T DELAY START sym-bol flashes.2. Press the OK button. In the display, “Start in 0 min” is displayed.3. Press the TIME (TIJD) buttonrepeatedly, until the displayshows the desired period bywhich you want to delay thestart, e. g. “Start in 4 hours”.A black bar appears underthe T symbol.3 If 20 hours is displayed andyou press the button again, the delay start timer is cancelled.4. Press the OK button. The display changes to the LONG ANTICREASEsymbol, this means that by pressing the OK button a 60-minute anti-crease phase can be set.5. Press the TIME (TIJD) button,if the 60-minute anti-creasephase is not to be set. Thedisplay shows the T DELAYSTART symbol as well as thetime remaining until the endof the programme (includ-ing the period by which thestart has been delayed).6. To activate the Delay Start Timer, press the START/PAUSE (START/PAUZE) button. The display now shows e. g., “Start in 4.00” (=4hours).The display for the time remaining until the start of the programme isreduced in 30 minute intervals (e. g., 4.00, 3.30, 3.00, ... 0.30, 0).3 Until the start of the programme the drum is moved at longish intervalsto loosen the laundry.Long Crease Guard1. Press the TIME (TIJD) buttonrepeatedly until LONGANTICREASE flashes.2. Press the OK button. A 60minute anti-crease phase isset. The display changes tothe exit icon. The displaynow shows the LONG AN-TICREASE symbol.Delay Start 12.45Start in 4 hours 19.01aýaýa aýaýaýaýaýaýaýT_ýkDEURPORTET/MIN.T/MIN.OPTIESOPTIONSOKOKTIJDTEMPSEXTRA DRY 12.45Cycle end at 19.01dýaýa aýaýaýaýaýaýaýTýaDEURPORTET/MIN.T/MIN.OPTIESOPTIONSOKOKTIJDTEMPSEXTRA DRY 12.45Long Anticrease 15.01aýaýa aýaýaýaýaýaýaýTýkDEURPORTET/MIN.T/MIN.OPTIESOPTIONSOKOKTIJDTEMPS