AEG Electrolux LAVATHERM T57830 User Information

AEG Electrolux LAVATHERM T57830 User Information Manual pdf 24 page image

24Electrical connectionAny electrical work required to install this appliance should be carried out by aqualified electrician or competent person.WARNING: THIS APPLIANCE MUST BE EARTHED.The manufacturer declines any liability should this safety measure not be observed.Should the appliance power supply cable need to be replaced, this must becarried out by our Service Centre.Before switching on, make sure the electricity supply voltage is the same as thatindicated on the appliance’s rating plate. (See picture on page 7).The power supply cable must be accessible after installing the machine.Door reversal instructionsWarning! The door stop may only be changed by a specialist. Ifnecessary,please contact our after-sales service or your specialist dealer.Warning! Before changing the door stop, disconnect the mains plug;with a permanent connection: fully unscrew or deactivate the fuse.1. Open loading door .2. Unscrew hinge A from the front ofthemachine and take off the loading door.3. Remove cover plates B and C. To dothis, insert a thin screwdriver into theslots as shown in the illustration, pressdownwards slightly and pry out thecover plates.4. Use an appropriate tool and exert pres-sure to unfasten locking block D fromthe snap-on fixture, take out and reins-ert on the other side, having rotated theblock through 180°.5. Unscrew hinge A from the loading door,rotate through 180°, reinsert on theopposite side and screw down.125985010 gb.qxp 2006-06-12 13:16 Page 24