AEG Electrolux Lavamat 74900 Instruction Booklet

ImportantThe wires in the mains lead are coloured in accordance with the followingcode:Green and Yellow - EarthBlue - NeutralBrown - LiveIf you fit your own plug, the colours of the wires in the mains lead of yourappliance may not correspond with the markings identifying the terminals inyour plug, proceed as follows:Connect the green and yellow (earth) wire to the terminal in the plug whichis marked with the letter «E» or the earth symbol or coloured green andyellow.Connect the blue (neutral) wire to the terminal in the plug which is markedwith the letter «N» or coloured black.Connect the brown (live) wire to the terminal in the plug which is markedwith the letter «L» or coloured red.The plug moulded on to the lead incorporates a fuse. For replacement, use a13 Amp BS1362 fuse. Only ASTA or BSI approved fuses should be used.The plug must not be used if the fuse cover/carrier is lost. The cover/carrier isindicated by the coloured insert at the base of the plug.A replacement cover/carrier must be obtained from your local AEG/ELEC-TROLUX Service Centre.Permanent connectionIn the case of a permanent connection it is necessary that you install adouble pole switch between the appliance and the electricity supply(mains), with a minimum gap of 3 mm between the switch contacts andof a type suitable for the required load in compliance with the currentelectrical regulations.The switch must not break the yellow and green earth cable at anypoint.This operation must be performed by a qualified electrician.Important: The power supply cable must be easily accessible afterinstalling the machine.47Installation

/ 48

Related manuals for AEG Electrolux AEG LAVAMAT 74900