217. Once inserted, make sure the two red buttonshave snapped out.8. Replace the drip tray and waste coffee con-tainer.9. Close the service door.Cleaning the milk containerImportant! Always clean the tubes insidethe milk container (C) when you prepare milk. Ifthere is still milk in the container, do not leave itout of the refrigerator for longer than strictly ne-cessary. Clean the container each time you pre-pare milk as described in Note 3 in the section"Making cappuccino".1. Turn the milk container lid clockwise then re-move it.2. Remove the milk spout and intake tube.3. Remove the fro-thed milk regula-tor by pulling itoutwards.4. Wash all the com-ponents thorou-ghly with hotwater and mildwashing-up li-quid.Make sure thereare no milk resi-dues left insidethe holes and the groove on the fine end ofthe frothed milk regulator.5. Check that the intake tube and spout are notclogged with milk residues.6. Replace the frothed milk regulator, milk spoutand intake tube.7. Replace the milk container lid.Cleaning the coffee jugClean the jug with a damp cloth and mild washingup liquid.N.B.! To avoid damaging the appearanceof the jug, do not wash in a dishwasher.CHANGING AND SETTINGMENU PARAMETERSWhen the appliance is ready, you can use the in-ternal menu to modify the following parametersand functions:• Choose language• Rinsing• Shut-off time• Set clock• Start time• Auto-start• Temperature• Water hardness• Program coffee• Program cappuccino• Program jug• Program water• Descale• Reset to default• Statistics• Install filter• Reset filter• Buzzer• ContrastSetting the languageTo change the language on the display, proceedas follows:• Press the icon (B2) to enter the menu.GrooveFrothed milkregulatorHoleHoleSpoutMilk intaketube