AEG HGB75400SM User Manual

Also see for HGB75400SM: User manual User manual

The wires in the cord are coloured asfollows:Green and yellow - EarthBlue - NeutralBrown - LiveWARNING!A cut off plug inserted into a13 amp socket is a seriousshock hazard. Ensure thatthe cut off plug is disposedof safely.3.7 Replacement of theconnection cableThe replacement of electriccable must be carried outexclusively by the serviceforce centre or by personnelwith similar competencies, inaccordance with the currentregulations.To replace the connectioncable use only H03V2V2-FT90 or equivalent type.Make sure that the cablesection is applicable to thevoltage load and the workingtemperature. The yellow/green earth wire (B) must beapproximately 2 cm longerthan the live and neutral wire(A).A B1. Connect the green and yellow (earth)wire to the terminal which is markedwith the letter 'E', or the earth symbol, or coloured green and yellow.2. Connect the blue (neutral) wire to theterminal which is marked with theletter 'N' or coloured blue.3. Connect the brown (live) wire to theterminal which is marked with theletter 'L'. It must always be connectedto the network phase. There must beno cut or stray strands of wirepresent. The cord clamp must becorrectly attached to the outersheath.3.8 Assembly1.2.3.min. 55 mmmin. 650 mm560 mm20+min. 150 mm30 mm480 mm20+min. 600 mm4.ENGLISH 11