• You do not deactivate a cooking zone or change the heat setting. After some timecomes on and the appliance deactivates. See the table.The times of Automatic Switch OffHeat setting , - - -The cooking zonedeactivates after6 hours 5 hours 4 hours 1.5 hoursThe heat settingTouch to increase the heat setting. Touch to decrease the heat setting. The displayshows the heat setting. Touch and at the same time to deactivate the cooking zone.Automatic Heat UpYou can get a necessary heat setting in a shortertime if you activate the Automatic Heat Up func-tion. This function sets the highest heat settingfor some time (see the illustration), and then de-creases to the necessary heat setting.To start the Automatic Heat Up function thecooking zone must be cold (no in the display).Touch of the cooking zone again and againuntil the necessary heat setting comes on. After 3seconds comes on in the display.To stop the function touch .TimerUse the Count Down Timer to set how long the cooking zone operates for only this onetime.Set the Timer after the selection of the cooking zone.You can set the heat setting before or after you set the timer.• To set the cooking zone:touch again and again until the indicator of a necessarycooking zone comes on.• To activate or change the Timer: touch or of the timer to set the time ( 00 - 99minutes). When the indicator of the cooking zone starts to flash slow, the time countsdown.• To deactivate the Timer: set the cooking zone with and touch to deactivate theTimer. The remaining time counts back to 00 . The indicator of the cooking zone goesout.• To see the remaining time: set the cooking zone with . The indicator of the cookingzone starts to flash quickly. The display shows the remaining time.When the time comes to an end, the sound operates and 00 flashes. The cooking zone de-activates.• To stop the sound: touch12345678910110 1 2 3 4 5 6 7 8 9Operating instructions 21