AEG HK634060XB User Manual
Also see for HK634060XB: User manualUser manualUser manualUser manualUser manual
                | |
• Do not put the aluminium foil on the appliance.WARNING!If there is a crack on the surface, disconnect power supply to prevent the electricalshock.INSTALLATION INSTRUCTIONSBefore the installation, note down the serial number (Ser. Nr.) from the rating plate.Therating plate of the appliance is on its lower casing.HK634060XB 949 595 180 0058 HAD 47 AO 220-240 V 50-60 Hz7 kWAEGThe Safety InstructionsWARNING!You must read these!Make sure that the appliance is not damaged because of transportation. Do not connect adamaged appliance. If it is necessary, speak to the supplier.Only an authorised servicing technician can install, connect or repair this appliance. Use on-ly original spare parts.Only use the built-in appliances after you assemble the appliance into correct built-in unitsand work surfaces that align to the standards.Do not change the specifications or change this product. Risk of injury and damage to theappliance.Fully obey the laws, ordinances, directives and standards in force in the country where youuse the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!Keep the minimum distances to other appliances and units!Install shock protection, for example install the drawers only with a protective floor directlybelow the appliance!Keep safe the cut surfaces of the worktop from moisture with a correct sealant!Seal the appliance to the work top with no space between with a correct sealant!Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher oroven!Do not install the appliance adjacent to doors and below windows! If not, when you openthe doors or windows they can push off hot cookware from the appliance.WARNING!Risk of injury from electrical current. Carefully obey the instructions for electrical connec-tions.• The electrical mains terminal is live.• Make electrical mains terminal free of voltage.• Install correctly to give shock protection.• Loose and incorrect plug and socket connections can make the terminal become too hot.• A qualified electrician must install the connections in the clamps correctly.Installation instructions 5 |
Related manuals for AEG HK634060XB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine