• For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres.Do not bond the ends over one another.• Bond the sealing tape flush into the corner of the rabbet, so that no silicon compoundcan get under the glass ceramic when grouting.• Do not extend the tapes.Assemblymin. 500 mmmin.50 mmmin.50 mm584 +1mm514+1mm490+1mmmin. 600mm560+1mmR10 mmR5 mm12mm7mmmin.25 mmmin.20 mmmin.30 mmDescription of the applianceCooking surface layout145 mm145 mm120/175/210 mm170 mm265 mm1 24351 Single cooking zone 1200 W2 Oval zone 1500/2400 W3 Single cooking zone 1200 W4 Control panel5 Triple cooking zone 800/1600/2300 WDescription of the appliance 5