AEG HK654070XB User Manual

Also see for 24" HK654070XB: User manual User manual User manual User manual User manual

Contents

• Install correctly to give shock protection.• Loose and incorrect plug and socket connections can make the terminal become too hot.• A qualified electrician must install the connections in the clamps correctly.• Use a strain relief clamp on cable.• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase ortwo phase connection.• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; orhigher). Speak to your local Service Centre.The appliance must have the electrical installation which lets you disconnect the appliancefrom the mains at all poles with a contact opening width of minimum 3 mm.You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fusesremoved from the holder), earth leakage trips and contactors.Assemblymin.50mmmin.50mmmin.500mm= =490+1mm 560+1mm600mmR 5mmmin.25 mmmin.20 mmmin.28 mmInstallation instructions 21