Problem Possible cause and remedyand number comes on. There is an error in the appliance.Disconnect the appliance from the electrical supply for sometime. Disconnect the fuse from the electrical system of the house.Connect again. If comes on again, speak to the service centre.comes on There is an error in the appliance, because a cookware boils dry oryou use not correct cookware. The protection against become toohot for the cooking zone operates. The Automatic Switch Off op-erates.Deactivate the appliance. Remove the hot cookware. After, ap-proximately 30 seconds activate the cooking zone again.should go out of the display, residual heat indicator can stay. Letthe cookware become sufficiently cool and check it with the sec-tion Cookware for the induction cooking zone.If you tried the above solutions and cannot repair the problem, speak to your dealer or thecustomer service. Give the data from the rating plate, three digit letter code for the glassceramic (it is in the corner of the glass surface) and an error message that comes on.Make sure, you operated the appliance correctly. If not the servicing by a customer servicetechnician or dealer will not be free of charge, also during the warranty period. The instruc-tions about the customer service and conditions of guarantee are in the guarantee booklet.ENVIRONMENT CONCERNSThe symbol on the product or on its packaging indicates that this product may not betreated as household waste. Instead it should be taken to the appropriate collection pointfor the recycling of electrical and electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potential negative consequences for theenvironment and human health, which could otherwise be caused by inappropriate wastehandling of this product. For more detailed information about recycling of this product,please contact your local council, your household waste disposal service or the shop whereyou purchased the product.Packaging materialThe packaging materials are friendly to the environment and can be recycled. The plasticcomponents are identified by marking: >PE<,>PS<, etc. Discard the packaging materials ashousehold waste at the waste disposal facilities in your municipality.16 Environment concerns