2. Immediately touch the necessary heat setting. After 3 seconds comes on in the dis-play.To stop the function change the heat setting.Power functionThe Power function makes more power available to the induction cooking zones. The Powerfunction is activated for 10 minutes at most. After, that the induction cooking zone auto-matically sets back to highest heat setting. To activate, touch , comes on. To deacti-vate, touch a heat setting - .Power function of the double ring cooking zonePower function of the inner ring starts when the appliance senses the pot smaller dimen-sions than the inner ring. Power function of the outer ring starts when the appliance sensesthe pot larger dimensions than the inner ring.Power managementThe power management divides the power be-tween two cooking zones in a pair (see the illus-tration). The power function increases the powerto the maximum level for one cooking zone in thepair. Automatically decreases the power in thesecond cooking zone to a lower level. The displayfor the reduced zone change between two levels.TimerCount Down TimerUse the Count Down Timer to set how long the cooking zone operates for only this onetime.Set the Count Down Timer after the selection of the cooking zone.You can set the heat setting before or after you set the timer.• To set the cooking zone:touch again and again until the indicator of a necessarycooking zone comes on.• To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99minutes). When the indicator of the cooking zone start to flash slow, the time countsdown.• To see the remaining time: set the cooking zone with . The indicator of the cookingzone starts to quickly. The display shows the remaining time.• To change the Count Down Timer:set the cooking zone with touch or .• To deactivate the timer: set the cooking zone with . Touch . The remaining timecounts back to 00 . The indicator of the cooking zone goes out. To deactivate you canalso touch and at the same time.26 Operating instructions