Heat setting displaysDisplay DescriptionThe cooking zone is off- The cooking zone operatesKeep WarmThe automatic heat-up function is onPower function is on+ digit There is a malfunction/ / OptiHeat Control (3 step Residual heat indicator): still cooking / keepwarm / residual heatLock/Child safety function is onCookware unsuitable or too small or no cookware on the cooking zoneThe automatic switch off is onOptiHeat Control (3 step Residual heat indicator)WARNING!\ \ Risk of burns from residual heat!OptiHeat Control indicates the level of the residual heat. The induction cooking zones makethe heat necessary for cooking directly in the bottom of the cookware. The glass ceramicis heated by the heat of the cookware.OPERATING INSTRUCTIONSOn and OffTouch for 1 second to start or stop the appliance.Automatic Switch OffThe function stops the hob automatically if:• all cooking zones are off.• you do not set the heat setting after you start the hob.• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.The sound operates until you remove the object.• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, thecooking zone must be cool.• you use incorrect cookware. comes on and after 2 minutes the cooking zone stopsautomatically.• you do not stop a cooking zone or change the heat setting. After some time comeson and the hob stops. See the table.Operating instructions 7