large cookware on two cooking zones atthe same time.6.5 Grill FunctionUse this function with theMaxisense Plancha Grill1)accessory.This function connects two right sidecooking zones under the accessory andthey operate as one.First set the heat setting for one of theright side cooking zones.To activate the function: touch . Toset or change the heat setting touch oneof the right control sensors.To deactivate the function: touch .The cooking zones operateindependently.6.6 Automatic Heat UpActivate this function to get a desiredheat setting in a shorter time. When it ison, the zone operates on the highestsetting in the beginning and thencontinues to cook at the desired heatingsetting.To activate the function thecooking zone must be cold.To activate the function for a cookingzone: touch ( comes on).Immediately touch a desired heatsetting. After 5 seconds comes on.To deactivate the function: change theheat setting.6.7 Power functionThis function makes more poweravailable to the induction cooking zones.The function can be activated for theinduction cooking zone only for a limitedperiod of time. After this time theinduction cooking zone automaticallysets back to the highest heat setting.Refer to “Technical data”chapter.To activate the function for a cookingzone: touch . comes on.To deactivate the function: change theheat setting.6.8 TimerCount Down TimerYou can use this function to set how longthe cooking zone should operate for asingle cooking session.First set the heat setting for the cookingzone then set the function.To set the cooking zone: touchagain and again until the indicator of anecessary cooking zone comes on.To activate the function: touch ofthe timer to set the time (00 - 99minutes). When the indicator of thecooking zone starts to flash slowly thetime counts down.To see the remaining time: set thecooking zone with . The indicator ofthe cooking zone starts to flash quickly.The display shows the remaining time.To change the time: set the cookingzone with . Touch or .To deactivate the function: set thecooking zone with and touch . Theremaining time counts back to 00. Theindicator of the cooking zone goes out.When the time comes to anend, the sound operates and00 flashes. The cooking zonedeactivates.To stop the sound: touch .CountUp Timer (The count up timer)You can use this function to monitor howlong the cooking zone operates.1) The accessory is not supplied with the appliance. For more information, please contact your localsupplier.www.aeg.com12