AEG HK953400FB User Manual

Also see for HK953400FB: User manual User manual

Contents

Problem Possible cause Remedycomes on There is no cookware onthe cooking zone.Put cookware on thecooking zone.The cookware is incor-rect.Use the correct cook-ware.The diameter of the bot-tom of the cookware istoo small for the cookingzone.Use cookware with cor-rect dimensions.The cookware does notcover the cross / square.Cover the cross / squarefully.and number comeson.There is an error in theappliance.Disconnect the appli-ance from the electricalsupply for some time.Disconnect the fuse fromthe electrical system ofthe house. Connect itagain. If comes onagain, speak to the serv-ice centre.comes on There is an error in theappliance because acookware boils dry. Theoverheating protectionfor the cooking zonesand the AutomaticSwitch Off operates.Deactivate the appli-ance. Remove the hotcookware. After approxi-mately 30 seconds, acti-vate the cooking zoneagain. If the cookwarewas the problem, the er-ror message goes out ofthe display, but the re-sidual heat indicator canstay. Let the cookwarebecome sufficiently cooland refer to “Cookwarefor the induction cookingzone” to see if yourcookware is compatiblewith the appliance.If you tried the above solutions and can-not repair the problem, speak to yourdealer or the customer service. Give thedata from the rating plate, three digitletter code for the glass ceramic (it is inthe corner of the glass surface) and anerror message that comes on.Make sure, you operated the appliancecorrectly. If not the servicing by a cus-tomer service technician or dealer willnot be free of charge, also during thewarranty period. The instructions aboutthe customer service and conditions ofguarantee are in the guarantee booklet.8. INSTALLATIONWARNING!Refer to the Safety chapters.Before the installation14 www.aeg.com