AEG HK955070FB User Manual

Also see for HK955070FB: User manual User manual User manual User manual

Contents

7. TROUBLESHOOTINGProblem Possible cause RemedyYou cannot activate oroperate the appliance.The appliance is notconnected to an electri-cal supply or it is con-nected incorrectly.Check if the appliance iscorrectly connected tothe electrical supply (referto connection diagram).Activate the applianceagain and set the heatsetting in less than 10seconds.You touched 2 or moresensor fields at the sametime.Touch only one sensorfield.The STOP+GO functionoperates.Refer to the chapter “Dai-ly Use”.There is water or fatstains on the controlpanel.Clean the control panel.An acoustic signalsounds and the appli-ance deactivates.An acoustic signalsounds when the appli-ance is deactivated.You put something onone or more sensorfields.Remove the object fromthe sensor fields.The appliance deacti-vates.You put something onthe sensor field .Remove the object fromthe sensor field.The residual heat indica-tor does not come on.The cooking zone is nothot because it operatedonly for a short time.If the cooking zone oper-ated sufficiently long tobe hot, speak to the serv-ice centre.The Automatic Heat Upfunction does not oper-ate.The cooking zone is hot. Let the cooking zone be-come sufficiently cool.The highest heat settingis set.The highest heat settinghas the same power asthe Automatic Heat Upfunction.You cannot activate theouter ring.Activate the inner ringfirst.The sensor fields be-come hot.The cookware is toolarge or you put it toonear to the controls.Put large cookware onthe rear cooking zones ifnecessary.There is no acoustic sig-nal when you touch thepanel sensor fields.The signals are deactiva-ted.Activate the signals (referto “OffSound Control”).ENGLISH 27