AEG OKO-SANTO series Operating Instructions Manual

Also see for OKO-SANTO Series: Operating instructions

Contents

Starting up and temperature regulationInsert the plug of the connection lead into the plug socket with pro-tective earth contact. When the refrigerator compartment door isopened, the internal lighting is switched on.The temperature selector knob is loca-ted on the RH side of the refrigeratorcompartment.Setting „0“ means: Off.Turning clockwise in direction „1“:Refrigerating unit on, the latterthen operating automatically.Setting „1“ means:Hightest temperature, warmest setting.Setting „6“ (end-stop) means:Lowest temperature, coldest setting.At a low ambient temperature of around 16°C, setting „1“ should beselected. At ambient temperatures of around 25°C, select setting „2“.If you require a lower temperature, select setting „3“ or „4”.Important!High ambient temperatures (e.g. on hot summer days) and a cold set-ting on the temperature regulator (position"5" to "6") can cause thecompressor to run continuously.Reason: when the ambient temperature is high, the compressor mustrun continuously to maintain the low temperature in the appliance.The fridge will not be able to defrost since automatic defrosting ofthe fridge is only possible when the compressor is not running (seealso "Defrosting" section). The result is the build up of a thick layer offrost on the fridge rear wall.If this happens, turn the temperature regulator back to a warmer set-ting (position "3" to "4"). At this setting the compressor will be swit-ched on and off as usual and automatic defrosting recommenced.+51AEG62