34InstallationInstallation LocationThe appliance should be set up in a well ventilated, dry room.Energy use and efficient performance of the appliance is affected bythe ambient temperature.The appliance should therefore– not be exposed to direct sunlight;– not be installed next to radiators, cookers or other sources of heat;– only be installed at a location whose ambient temperaturecorresponds to the climate classification, for which the appliance isdesigned.The climate classification can be found on the rating plate, which islocated at the left on the inside of the appliance.The following table shows which ambient temperature is correct foreach climate classification:Installation directly under a hob is not allowed. The temperatures ofthe hob, which in part are quite high, may damage the appliance.If a hob is installed near the appliance, the corresponding installationand safety instructions must be adhered to. Considering the numerousinstallation conditions which are possible, there is no way of providingdetailed information here.It is necessary to avoid overheating of the appliance by maintainingClimate classification for an ambient temperature ofSN +10 to +32 °CN +16 to +32 °CST +18 to +38 °CT +18 to +43 °CRemove transport packagingThe appliance and the interior fittings are protected for transport.+1. Pull off the adhesive tape on the left and right side of the door.2. Remove all adhesive tape and packing pieces from the interior of theappliance.