AEG SANTO Operating Instructions Manual

Also see for SANTO: Installation instructions Installation instructions Installation instructions Operating instructions Operating instructions

38ed to the temperatures shown in the display. The DESIRED temperatureis indicated by flashing numbers.ACTUAL temperature means:The temperature display indicates the temperature that is currentlypresent in the refrigerator. The ACTUAL temperature is indicated bycontinuously illuminated numbers.Temperature DisplayThe temperature display can indicate several pieces ofinformation.• During normal operation, the temperature currently present in therefrigerator (ACTUAL temperature) is displayed.• When the temperature is being adjusted, the temperature currentlyset flashes (DESIRED temperature).Prior to Initial Start–UpPlease clean the appliance interior and all accessories prior to initialstart-up (see section: “Cleaning and Care”).+Starting up and temperature regulation+1. Insert the plug into the plug socket. When the refrigerator compart-ment door is opened, the internal lighting is switched on.2. Press ON/OFF button.The green mains pilot indicator illuminates.3. Press either the „+“ (WARMER) or „-“ (COLDER) button.The temperature display switches over and the DESIRED temperaturecurrently set flashes on the temperature display.4. Set the required temperature by pressing the „+“ (WARMER) or „-“(COLDER) buttons (see section "Temperature setting buttons"). Thetemperature display will immediately show the changed setting. Witheach further press of one of the two buttons, the DESIRED tempera-ture is adjusted by 1°C. Adjustable temperature range: +2°C to +8°C.