AEG SANTO Series User Manual

Also see for SANTO Series: User manual Operating instructions Operating instructions Operating instructions Operating instructions

Contents

44What to do if...Heavy build up of frost,possibly also on the doorseal.Door seal is not air tight(possibly after reversingthe door).Carefully warm the leakingsections of the door sealwith a hair dryer (on acool setting). At the sametime shape the warmeddoor seal by hand suchthat it sits correctly.The compressor does notstart immediately afterchanging the temperaturesetting.This normal, no error hasoccurred.Water on the floor or onstorage shelves.Water drain hole isblocked.See the “Cleaning andCare” section.The compressor starts aftera period of time.Changing the light bulbWarning! There is a risk of electric shocks! Before changing the lightbulb, switch off the appliance and unplug it, or pull the fuse or thecircuit breaker.Light bulb data: 220-240 V, max. 15 W1. To switch off the appliance, turn the temperature regulator toposition "0".2. Unplug the mains plug.The food is too warm.Temperature is not proper-ly adjusted.Please look in the “Startingup and temperature regu-lation” section.Door was open for anextended period.A large quantity of warmfood was placed in theappliance within the last24 hours.The appliance is near aheat source.Open the door only as longas necessary.Turn the temperatureregulator to a colder set-ting temporarily.Please look in the“Installation location” section.Light bulb is defective.Interior lighting does notwork.Please look in the “Changingthe Light Bulb” sections.Symptom Possible Cause Remedy