AEG X99384MDO User Manual

Also see for X91384MDO: User manual User manual

Contents

5ENGLISHCONTROLSA B C D FEA: Hood Functions On/Off.When the button is touched with the hoodturned off, all functions light up (intensity50%) and are enabled.When the button is touched with the hoodin operation, all functions are turned off anddisabled (Motor Off + Lights Off).B: Manages motor speed:0-V1-V2-V3-V4-P.When the area is touched, the motor startsat the speed required.P = Intensive Speed, timed for 5 minutes,after which the system returns to theprevious speed.When activated from Motor Off it returnsto speed V1.When the required speed istouched, it will become brighter (intensity100%) than the other functions (intensity 50%).C: Delay function.Touching this button activates automaticshutdown of the Motor, the Fans and theLighting with a 10 minute delay. It can onlybe activated with the motor on, running atany speed except Intensive, and with theSensor = Off.Enables / Disables the Remote ControlReceiver.When this button is pressed and held for4 seconds (Motor Off + Lights Off, in theabsence of other alarms, the Led will lightup for:4 seconds to indicate that the RemoteControl has been Activated2 seconds to indicate that the RemoteControl has been Deactivated.D: Sensor.In this mode the Hood operatesautomatically for a maximum of 5 hours,after which it switches the Motor off. Thehood modifies the speed of the motoraccording to the findings of the sensor.Buttons B and C do not work. The functionis disabled by pressing the Button or turningthe hood off.E: Manages Lighting Intensity:0-L1-L2-L3-LMax.When this area is touched, the Lights turn onat the required intensity. When the lightingintensity is touched, it will become brighter(intensity 100%) than the other functions(intensity 50%).F: Filter ResetResets the FilterSaturation alarm when thebutton is touched with the motorand lighting turned off.After 100 hours operation the Led lightsup continuously to indicate saturation ofthe Metal Grease Filters. After 200 hoursoperation the Led flashes to indicatesaturation of the Activated Charcoal Filters.Enables/Disables the Activated CharcoalFilter Alarm.When this button is pressed and held for4 seconds(Motor Off + Lights Off), in theabsence of other alarms, the Led will lightup for:4 seconds to indicate the Activated CharcoalFilter Alarm has been activated2 seconds to indicate the Activated CharcoalFilter Alarm has been deactivated.After connecting the hood to the mains, thecommands are activated after 4seconds.When the Hood is switched off, none of thefunctions is displayed, and only the normallettering on the control panel is visible.All the rest will light up (intensity 50%) whenbutton A is touched.The controls are activated by touching theselected function, which will light up morebrightly (intensity 100%) with respect tothe other hood functions (intensity 50%).When no commands are given for at least10 seconds, only the selected functions willbe lighted (Intensity 100%) and all the restwill turn off (Intensity 50%). After 7 hours inoperation, if no further commands are giventhe hood will switch off (Motor Off + LightsOff), from here you can touch for activatedthe function, and the next touch you canselect the desired function.It is possible toactivate one of the hood functions (Speedand Lighting) not just by touching the controlpanel, but also by placing a finger on thepanel and sliding it towards the chosen