AmpFlex® - Flexible AC Current Probes- 18 -MaintenanceWarning For maintenance use only specified replacement parts. To avoid electrical shock, do not attempt to perform any servicingunless you are qualified to do so. Do not perform any service while the AmpFlex ® is on any circuit. To avoid electrical shock and/or damage to the instrument, do not getwater or other foreign agents into the electronic module. Also see warning on page 2.Battery Replacement If the power ON indicator (green LED) blinks or does not light up,replace the battery. Remove the AmpFlex® from any circuit before replacing the battery. To replace the battery, open rear case, replace battery andreassemble. The green LED should go on when the module is turnedon.Cleaning It is important to keep the probe sensor latch mating surfaces cleanand prevent foreign bodies from hampering the closing. The sensormay be gently cleaned with a soft cloth, soap and water. Dryimmediately after cleaning. Avoid water penetration into the electronicmodule. Make sure the sensor, electronic module, and all leads are dry beforeany further use.www.ShopAEMC.caShop for AEMC products online at: 1.800.561.8187