AEMC MF 300-6-2-10-HF User Manual

Contents

AEMC MF 300-6-2-10-HF User Manual Manual pdf 4 page image

2 MiniFlex ® Flexible AC Current ProbeCHAPTER 1INTRODUCTIONWARNINGThese safety warnings are provided to ensure the safety of person-nel and proper operation of the instrument.• Read this instruction manual completely and follow all the safetyinformation before attempting to use or service this instrument.• Safety is the responsibility of the operator. The MiniFlex® mustbe used only by qualified personnel using applicable safetyprecautions.• Wear protective clothing and gloves as required.• Use caution on any circuit: potentially high voltages and currentsmay be present and may pose a shock hazard.• Read the safety specifications section prior to using the currentprobe. Never exceed the maximum voltage ratings given.• ALWAYS de-energize the circuit before wrapping the MiniFlex®around bare conductors, bus bars, or near live parts. Do notwrap on live conductors.• ALWAYS connect the electronic module to the display devicebefore wrapping the MiniFlex® around the sample being tested.• ALWAYS inspect the module, sensor, sensor cable, and outputterminals prior to use. Replace any defective parts immediately.Use only factory parts.• NEVER use the MiniFlex® on electrical conductors rated above1000V CAT III; 600V CAT IV.