AX1 ICON User Manual17Version 1.0System Test Mode(A) Walk Test2. Press [TEST] key, then press [ ] to scroll to WALK Test and followed by [#] key to enterthe mode.3. Each time zone faulted, siren will sound for 2s and the corresponding zone light willfast flash with keypad buzzer beeping.4. To exit walk test, press [BACK] key.(B) Bell Test1. Bell test allow on-site testing for siren & bell functionality.2. Siren and bell will sound for 3 seconds.3. If siren or bell does not sound, consult your system installer.1. Walk test allow on-site testing for each zone of the system.(Press and hold for 2s)+ [ ] + [#](When [ ] is entered) (When [#] is entered) (Walk Test in progress)(Press and hold for 2s)+ [ ] + [#](2 times)(When [ ] is entered) (When [#] is entered)

Auto Home Arming

Timer Arming

Remote Control Disarming

Automation Control (Individual Control

Zone Chime

Emergency Situation

System Test Mode

Keypad Setting Mode

View Timer Mode

Enter User Programming Mode

Program ARM Timer

AX1 ICON User Manual

ICON