AZZA 366A-AV User Manual
                                                 | |
Contents
| 
TheAZZA 366 MAINBOARD SERIESPage 32HDD S.M.A.R.T Capability(Using this feature may decrease system performance)You may “enable” this option if your Hard Drive supports the S.M.A.R.T. technology (SelfMonitoring Analysis Reporting Technology) feature. S.M.A.R.T. will monitor and reportyour Hard Drive health status. Ask your Hard Drive Vendor for further information.Video BIOS ShadowThese fields allow you to change the Video BIOS location from ROM to RAM. Informationaccess is faster through RAM than ROM. Therefore when you enable this option you willenhance your system performance.!!!!DRAM Clock/Drive Control [Press Enter]!!!!AGP & P2P Bridge Control [Press Enter]!!!!CPU & PCI Bus Control [Press Enter]Memory Hole [Disabled]System BIOS Cacheable [Disabled]Video RAM Cacheable [Disabled]Item HelpMenu Level !!!!CMOS Setup Utility - Copyright (C) 1984 - 2001 Award SoftwareAdvanced Chipset FeaturesDram Clock Drive ControlThis field allows you to select the FSB and DRAM frequency. When you press enter thefollowing menu will appear.3.5. Advanced Chipset FeaturesCurrent FSB Frequency 100 MHzCurrent DRAM Frequency 133 MHzDRAM Clock [By SPD]DRAM Timing [By SPD]X SDRAM Cycle Length 2.5X Bank Interleave DisabledX Precharge to Active (Trp) 3TX Active to Precharge (Tras) 6TX Active to CMD (Trcd) 3TDRAM Command Rate [2T Command]Item HelpMenu Level !!!!!!!!CMOS Setup Utility - Copyright (C) 1984 - 2001 Award SoftwareDRAM Clock/Drive Control!Current FSB FrequencyThe setting for this field will be automatically selected by the BIOS. The value that theBIOS selects depends on the settings you have chosen for JP6. If you have a 100 MHzCPU but have and set JP6 to OPEN the BIOS will detect 133 MHz.Managing The PC BIOS |
Related manuals for AZZA 366A-AV
manualsdatabase
Your AI-powered manual search engine