Appendix C – AAEON SDK Hardware Settings 94Fanless Embedded Box PC FWS-2275C.2 LAN BypassFWS-2275 provides LAN Bypass kit and allow uninterrupted network traffic even if asingle in-line appliance is shut down or hangs.C.2.1 LAN BypassTable1: LAN Kit ID SelectLAN_ID2 LAN_ID1 LAN_ID0 LAN kit selected0 0 0 LAN Kit 1 Selected0 0 1 LAN Kit 2 SelectedTable2: LAN Bypass register tableFunction DescriptionLAN_ID3 Use for selecting which LAN kit will beconfigured, refert to Table 1 of ID Selecttable of LAN kit.They should be set before ACT_EN.LAN_ID2LAN_ID1LAN_ID0PWR_ONUse for configuring LAN Bypass functionbehavior to LAN kit, when system poweron.1: Bypass0: Pass ThroughPWR_OFFUse for configuring LAN Bypass functionbehavior to LAN kit, when system poweroff.1: Bypass0: Pass ThroughWDT_ENUse for configuring WDT functionbehavior to LAN kit, when WDT triggered.0: Normal WDT reset (Default)1: Force BypassACT_ENUse for activating programming of LANkit. It is edge triggering (falling edge 1 to0) and should be set to high(1) as itsnormal state.
