Appendix C – Standard LAN Bypass Platform Setting 82Network Appliance FWS-7360C.2 LAN BypassC.2.1 IntroductionThe FWS-7360 provides a LAN Bypass kit and allows uninterrupted network traffic evenif a single in-line appliance is shut down or hangs.C.2.2 LAN Bypass ConfigurationTable 1 : ID Select table of LAN kitLAN_ID2 LAN_ID1 LAN_ID0 LAN kit selected0 0 0 LAN Kit 1 Selected0 0 1 LAN Kit 2 SelectedTable 2 : LAN Bypass relative register tableFunction DescriptionLAN_ID3 Use for selecting which LAN kit will be configured, refertto Table 1 of ID Select table of LAN kit.They should be set before ACT_EN.LAN_ID2LAN_ID1LAN_ID0PWR_ONUse for configuring LAN Bypass function behavior toLAN kit, when system power on.1: Bypass0: Pass ThroughPWR_OFFUse for configuring LAN Bypass function behavior toLAN kit, when system power off.1: Bypass0: Pass ThroughWDT_ENUse for configuring WDT function behavior to LAN kit,when WDT triggered.0: Normal WDT reset (Default)1: Force BypassACT_ENUse for activating programming of LAN kit. It is edgetriggering (falling edge 1 to 0) and should be set tohigh(1) as its normal state.
