Aaeon HSB-800I User Manual
                                                     | |
Contents
| 
H a l f - s i z e S B C H S B - 8 0 0 I2.6 Setting JumpersYou configure your card to match the needs of your application bysetting jumpers. A jumper is the simplest kind of electric switch. Itconsists of two metal pins and a small metal clip (often protected bya plastic cover) that slides over the pins to connect them. To “close”a jumper you connect the pins with the clip.To “open” a jumper you remove the clip. Sometimes a jumper willhave three pins, labeled 1, 2 and 3. In this case you would connecteither pins 1 and 2 or 2 and 3.1 2 3Open Closed Closed 2-3A pair of needle-nose pliers may be helpful when working withjumpers.If you have any doubts about the best hardware configuration foryour application, contact your local distributor or salesrepresentative before you make any change.Generally, you simply need a standard cable to make mostconnections.Chapter 2 Quick Installation Guide 2-8 |
Related manuals for Aaeon HSB-800I
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine