3-7Chapter 3: BIOS setupThe following item appears only when you set Fan Control Mode to [ManualMode].PWM/DC Voltage Output [255]Sets the voltage allocated for Fan Control. Input value range: [0~255]The following items appear only when you set Fan Control Mode to [ThermalCruise Mode].Target Temperature [50]Input value range: [0~127]Tolerance of Temperature [0]Input value range: [0~7]Fan Out Start-Up Value [127]Input value range: [0~255]Fan Stop Duty [Down to 0]Configuration options: [Down to 0] [To Fan Out Stop Value]Fan Out Stop Value [100]The Fan Out value decreases to this value if the temperature reaches belowthe lowest temperature limit. Input value range: [0~255]Fan Out Stop Time [60]Determines the amount of time it takes for the Fan Out value to fall from thestop value to zero. Input value range: [0~255]Critical Temperature [75]Determines the amount of time Fan Out takes to decrease its value by onestep. Input value range: [0~255]Fan Out Step Up Time [10]Determines the amount of time Fan Out takes to increase its value by onestep. Input value range: [0~255]Fan Out Step Down Time [10]Determines the amount of time Fan Out takes to decrease its value by onestep in intervals of 0.1 seconds. Input value range: [0~255]3.3.8 USB ConfigurationThe items in this menu allow you to change the USB-related features.The USB Devices item shows the auto-detected values. If no USB device isdetected, the item shows None.