Chapter 2 Installation 19LVDS Connector (CN3)Pin Signal Pin Signal1 TX1+ 2 TX1-3 GND 4 GND5 TXCLK+ 6 TXCLK-7 GND 8 VCC9 VCC 10 VCC11 TX2+ 12 TX2-13 GND 14 GND15 TX0+ 16 TX0-17 TX3+ 18 TX3-19 ENBKL 20 GND10/100 Base-Tx Ethernet 1/2 Connector(CN4,CN5)PCM-6894 is outfitted with 2 standard RJ-45 LAN connectors. Withsupport from Realtek 8139C chipset using either 10Mbs or 100Mbsare possible through its N-way auto-negotiation featured operation.Please refer to the pin definition listed below.Pin Signal Pin Signal1 TX+ 2 TX-3 RX+ 4 N.C.5 N.C. 6 RX-7 N.C. 8 N.C.When PCM-6894's power is applied, the control signal is low untilthe relevant flat panel signals are present. The configuration isdone completely via the software utility. You don't need to set anyjumper.
