Aaeon SBC-350A Manual

Also see for SBC-350A: User manual

Contents

Aaeon SBC-350A Manual Manual pdf 42 page image

36 SBC-350A User's ManualEnable16-bit ISA Cycle Insert Wait 0 w/s (default)1 w/sSlow Refresh DisableEnable (default)Refresh Type CAS/RAS (default)RAS onlyIO Recovery Disable (default)EnableOn Chip I/O Recovery Disable (default)EnableI/O Recover Period Define 0 (default) ....3750ns, 250ns/stepAuto Configuration with BIOS DefaultsThis main menu option loads the system default values stored inthe BIOS ROM at the factory.Auto Configuration with Power-On DefaultsThis main menu option loads the settings stored in the CMOSmemory when you turned on your system. If your system behaveserratically, you can use this feature to check for incorrect settings.Auto Detect Hard DiskThis option simplifies the hard disk drive configuration by auto-matically configuring the system to your HDDHard Disk UtilityThis option lets you perform low-level hard disk drive preparationbefore you use the DOS FDISK or FORMAT utilities. All of itsfunctions are destructive to existing data on the disk drive.Most IDE hard drives come preformatted from the factory, so youwill probably only need these utilities if your hard disk developsbad sectors or ages and needs to have the formatting informationrefreshed.Write to CMOS and Exit/Do not ExitAfter you have made your configuration changes, select Write toCMOS and Exit. If you decide you want to abandon the changesyou have made, select Do not Write to CMOS and Exit.The BIOS will then perform a memory test, and attempt to boot