Aaeon SBC-456 Manual

Also see for SBC-456: User manual

Aaeon SBC-456 Manual Manual pdf 81 page image

Chapter 4 Driver Installation 73OS/2These drivers are designed to function with the OS/2 Version 4.0, 3.0and 2.11 operating systems.To install this driver, do the following steps:1. Open an OS/2 full screen or windowed session.2. Place the Supporting CD-ROM into your CD-ROM drive.3. At the OS/2 command prompt, type the following commands tocopy the files to the OS/2 drive:cd-rom :\CD ROM\model name\driver\vga driver\os2\"cd-rom" : the drive letter of your CD-ROM drive"model name" : the model number of your productWhen the Setup Program is completed, you will need to perform ashutdown and then restart the system in order for changes to takeeffect.A log of the information output during the install can be foundin :\OS2\INSTALL\DISPLAY.LOG4. After restarting the system, perform the following steps:1. Open the OS/2 System folder.2. Open the System Setup folder.3. Open the Display Driver Install Object.This step will execute the Display Driver Installation (DSPINSTL)utility program to finish installation of the new drivers.4. When the Display Driver Install window appears, selectPrimary Display and then select OK.5. When the Primary Display Driver List window appears, select"Chips and Technologies 69000" from the list of adapter types,then select OK or install the video driver.