Aaeon SBC-555 Manual
                                                                        | |
Contents
| 
Chapter 4 Driver Installation 61Windows NT 4.0Driver installation1. Install Windows NT4.0 as you normally would for a VGA display.First click the Start button, go to Settings and click on ControlPanel. Choose the Display icon and click on the icon. In theDisplay Properties window, click on the Settings tab. Then clickon Change Display Type. In the Change Display Type window,click on the Change button under adapter Type. This will bringup the Select Device window.2. Place the WindowsÔ NT Display Driver Diskette in drive A. Inthe Select Device window, click on Have Disk, select "Browse"and find the NT4.0 driver in the Drive A:\Winnt4.0, and then clickOK. The name of the Chips and Technologies, Inc. VideoController driver will appear highlighted in the Modules list box.Select Chips and Tech. 65554 PCI(new) and Click OK. Click OKto start the driver installation.3. Once the installation is complete, the Change Display Typewindow will reappear. Click on Close to close the window. Thenthe Display Properties window will reappear. Click on Apply.Restart the system for new settings to take effect. |
Related manuals for Aaeon SBC-554V
manualsdatabase
Your AI-powered manual search engine