A&D TM-2440 Instruction Manual

Also see for TM-2440: Quick start guide Quick start guide Instruction manual Quick start guide Instruction manual

Contents

A&D TM-2440 Instruction Manual Manual pdf 54 page image

368.2.2. The Clock and the Monitor Function of MeasurementThe initial settings can be configured using the following methods.The method to use switches on the recorder.The method to use dedicated peripheral that is connected to therecorder using the USB cable.Procedure of operation using switchesStep 1. If the indication of the display is hidden, press the START/STOPor EVENT switch to return to the display of waiting mode.Step 2. If the mark is shown, press and hold the EVENT switch for3 seconds or more to suspend A-BPM.The mark turns off.Step 3. While holding the START/STOP switch, press and hold theEVENT switch for 6 seconds or more. Display will display onthe OLED display.Step 4. Operation switches are as follows:EVENT switch .................Change of the current parameter.START/STOP switch ......Decision, next item, end of settings.Thereafter, use these switches in another items.Step 5. After configuring settings, press the START/STOP switchto return to waiting mode.Item OLED RangeMonitorfunctionDisplayxx xx = OFF, ONYear ClockYear xx xx = 17 to 99. Last two digits of year.Month ClockMon. xx xx = 1 to 12 monthDay ClockDay xx xx = 1 to 31 day