Page 70 December 2015 – TD 304 OPERATING MANUAL – Doppler Current Profiler Sensor5.4 Deployment settingsSelect Deployment settings. Double‐click on the DCPS to select the Doppler current profiler sensor (Figure 5‐9)Figure 5‐9: Deployment settingsIf additional sensors are connected to the SeaGuardII platform, it is possible to configure the DCPS to take input fromthese other sensors. If pressure sensor and at least conductivity are available, it gives the possibility to get thecorrect sound speed and depth while the sensor is running.The Figure 5‐10 gives an example of a wave & tide sensor connected to the datalogger. The Wave and Tide sensor isselected as pressure sensor and the Tide Pressure is selected as input parameter. This enables the DCPS to calculatethe depth dependent on this pressure input and other sensor input and/or the fixed settings.Figure 5‐10: External pressure sensor parameter input