CHAPTER 1. INTRODUCTIONHardware OverviewHardware Components - This remote keyboard contains easy to use control keys on thefront and simple input and output connectors on the backControl Buttons & Connection- The unit provides the primary operator interface. Mostoperations are one or two button presses.The following Table contains a description for each buttonson the keyboard and port of cable connection. Use Figure 1and Figure 2 as a reference.Number Button Description1ESC / POWER Pressing the ESC/POWER button enters the Power on/off orescape key. Right description led on(red). Pressing it again exitsthe POWER OFF. (Push the button (about 2~3 seconds)and then POWER OFF)2LCD DISPLAYDisplays Camera ID, Protocol, Function status, General status, etc.3Number Camera ID setting value change, PTZ setup(1+ ),Main setup(2+ )4ControllerFunction keysHold : System locking (Unlocking : Input the Pass word 4 digit ****)SHIFT/TURBO : SHIFT-Key for special function (Customize) /TURBO -High SpeedAUX : External equipment on/offSET : Ptz and main setup (1 + ), (2+ )IRES CLOSE : Camera Iris closeIRIS OPEN : Camera Iris open5Function keys F1 ~ MENU/AUTO : Function Keys(Preset, Tour, Pattern, Scan, Auto).MENU :Used for Camera (Pan/Tilt) Menu adjustment.123 4567< Figure 1 >User Manual - ASTKJ-1201P - AASSET SECURITY