Using the display and operating elements26 eud-1292/1.1 – R1.0 – 09.2011Undoing actionsTo cancel operating steps, proceed as follows:Activate/deactivate functionYou can enable or disable a function or a menu entry by selecting the entry you wantand pressing the Select softkey.Resetting activated featuresYou can deactivate again all the activated functions (e.g. Forwarding).Exit editor without changes:Press the End key.Scrolling back through the menu step by step:Press the Correction key.Back to the idle state in the menu:Press the End key.Select Activate/deactivate function:Press the Select softkey.Press the navigation key up.➔Activated features is opened.Or:Activated features are also available via the menu: Menu > Activated features.Reset Press the Reset softkey to deactivate the function you want.➔The function is now deactivated.
