Administrator Level Options3-12 41-001129-00 Rev 09, Release 1.4.1IP Phone Administrator GuideAdministrator Options NetworkThe following paragraphs describe the network parameters you can configure onthe IP phone. Network settings are in two categories:• Basic network settings• Advanced network settingsBasic Network SettingsIf Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phoneautomatically configures all of the Network settings. If the phone cannot populatethe Network settings, or if DHCP is disabled, you can set the Network optionsmanually.• DHCPEnables or disables DHCP. When enabled, the phone may populate thefollowing fields as read-only: IP Address, Subnet Mask, Gateway, BroadcastAddress, Domain NameServers (DNS), Trivial File Transfer Protocol (TFTP) Server, and TimerServers.• IP AddressIP address of the IP phone. To assign a static IP address, disable DHCP.• Subnet MaskSubnet mask defines the IP address range local to the IP phone. To assign astatic subnet mask, disable DHCP.• GatewayThe IP address of the network’s gateway or default router IP address. Toassign a static Gateway IP address, disable DHCP.Note: Specific parameters are configurable using the Aastra Web UI onlyand are indicated where applicable.Note: For DHCP to automatically populate the IP address or qualifieddomain name for the TFTP server, your DHCP server must supportOption 66. For more information, see Chapter 4, the section, “DHCP” onpage 4-4.DFW Phone 972-992-4600
