Supplementary features76 Aastra 5361/Aastra 5361ipeud-1280/1.2 – R3.0 – 04.2013Setting functions by remote controlThis section explains how you can alter your phone’s settings even if you are notdirectly at your phone.You are not at your desk and want to set various functions on your phone from a dif-ferent phone.You can activate/deactivate many of your phone's functions by remote control from adifferent phone.The remote control is initiated using a special function code. You can then enter thefunction commands and function codes. Using remote control from a third-party phone:1. Enter function code #06.2. Enter your phone number.3. Enter your PIN.4. Enter the function code for activating/deactivating the function you want.Pick up the handset.➔You hear the acknowledgement tone.Put the handset on-hook.➔The function is activated/deactivated.Note:The default PIN setting "0000" is not accepted. First change the PIN asdescribed in chapter "Changing the PIN", page 84 or use the function code *47(see "User’s Guide Function Codes" on the Aastra DocFinder). If you have forgot-ten your PIN, your system administrator can reset it to the default setting.☛
