Supplementary features62 eud-1282/1.1 – R1.0 – 10.2011Activating personal call routingYou wan to specify which of your phone shall ring when you receive a call.If your system administrator has set up a phone number with several phones for youas well as the 5 call routings, you can specify which of your phones shall signal a callby using the personal call routing. Your system administrator can set up up to 5 callroutings. You can only answer a call on phone where the call is signalled. Contact yoursystem administrator for more information.You can activate a call routing for all phones. If you have not configured a call routing,the default setting (all phones are ringing) is used as standard.This function must be stored under a Foxkey or a function key (see Chapter "Configu-ring keys", page 91).Activating ring aloneYou want to specify which of your phones shall ring acoustically when you receive acall.When your system administrator has set up a phone number with several phones, youcan define on which phones a call shall acoustically be signalled using ring alone.When you have activated ring alone on a phone, the acoustic ringing tone is deacti-vated for all other phones ( ). An incoming call is signalled in the display of allphones. You can answer the call on each of your phones.Configuring personal call routing:Configuring function key and selecting function:Personal call routing: Activating a call routing.Personal call routing menu: Overview menu.Renaming personal call routing:Menu > Settings > General > Personal call routing > Modify.Activating personal call routing in idle state:Press the function key for .➔Personal call routing is activated.Deactivating personal call routing in idle state:Press the function key for .➔Personal call routing is deactivated and the default setting activated.Or:You can deactivate the Personal call routing using Menu > Activated features >Reset.☛
