The Device Menu109Time: Displays time set for the alarm clock.Edit: Changes time setting.Text: Displays text entered for the alarm clock.Edit: Change/re-enter the text (32 characters max.).Note: If the ringer is switched off (see page 111), there is no acoustical signalfor the alarm clock set.A wake-up call which is already being signalled can be interrupted for5 minutes at a time, as described on page 44 with Snooze. When opening analarm which has been paused, Stop (to switch off ) and Snooze (to continueinterrupting the signal) appear.Timer: options for setting a timer which counts backwards (max. 23 hours / 59minutes). The respectively remaining time until signalling (beeps increasing involume) is shown on the display. The ring tone of the timer cannot be con-figured.Format settings: For configuring date and time display format.Time format: Changes the time format (24h or 12h am/pm)Date format: Changes the date format.DD.MM.YY for, e.g. 10.04.09DD.MM.YY for, e.g. 04/10/09DD.MM.YY for, e.g. 09-04-10DD.MM.YY for, e.g. 09-04-10“Audio” MenuVolume settings: For changing the following settings, use the and navigationkeys or enter a number (1 … 7).Earpiece: Displays the currently set earpiece volume.Handsfree: Displays the currently set volume for handsfree mode.Corded headset: Displays the currently set headset volume (not applicable toBluetooth headset).Ringer: Displays the currently set earpiece volume.Ringer settings: Ringer settings.
