148 Model 6757i CT IP Phone User GuideLine Keys and Softkeys Empty KeyYou can set a softkey to force a blank entry on the IP phone display for a specific key. You dothis by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) afterany hard-coded keys have been added. If a particular key is not defined, it is ignored.Configuring an Empty KeyUse the following procedure to configure an Empty softkey on the 6757i CT phone.1. Click on Operation->Softkeys and XML.orClick on Operation->Expansion Module .Softkeys2. Select from “Key 1” through “Key 10” on the Top keys.orSelect from "Key 1" through "Key 20" on the Bottom keys.3. In the "Type" field, select Empty.4. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you wantto apply to this softkey.Aastra Web UI
