Additional Features169 41-001385-00 Rev 01 – 06.2013Status Scroll DelayUsing the Aastra Web UI, you can specify a scroll delay option that allows you to set the time delay, in seconds, betweenthe scrolling of each status message on the phone. You can specify this setting in the "Status Scroll Delay (seconds)"field at the path Basic Settings->Preferences->General. The default time is 5 seconds for each message to display beforescrolling to the next message. You can increase or decrease this time as required. Setting and saving the value in the Aas-tra Web UI applies to the phone immediately.Configuring Status Scroll DelayUse the following procedures to specify a status scroll delay on the IP phone.Aastra Web UI1. Click on Basic Settings->Preferences->General.2. Enter a value in the "Status Scroll Delay (seconds)" field. Valid values are: 1 to 25 seconds. Default is 5 seconds.3. Click Save Settings.