Operational, Basic, and Advanced Parameters41-001160-03 Rev 00, Release 2.5 A-183SIP Diversion DisplayGlobal SettingPer-Line SettingParameter –sip diversion displayConfiguration Files aastra.cfg, .cfgDescription Global parameter that enables/disables the display of the Caller ID and/or caller name, and reason for diversion on the phones LCD for anoutgoing call that is being diverted to another destination. The phonethat receives the diverted call displays the Caller ID of the original calldestination.Note: You must restart the phone after setting a value for this parameter.Format BooleanDefault Value 1Range 0 (disabled - do not display diversion information to the phone’s LCD)1 (enabled - display diversion information to the phone’s LCD)Example sip diversion display: 0Parameter –sip lineN diversion display(N is a line number from1 to 9)Configuration Files aastra.cfg, .cfgDescription For a specific line on the phone, this parameter enables/disables thedisplay of the Caller ID and/or caller name, and reason for diversion onthe phones LCD for an outgoing call that is being diverted to anotherdestination. The phone that receives the diverted call displays the CallerID of the original call destination.Note: You must restart the phone after setting a value for this parameter.Format BooleanDefault Value 1Range 0 (disabled - do not display diversion information to the phone’s LCD)1 (enabled - display diversion information to the phone’s LCD)Example sip line1 diversion display: 0
