Overview41-001160-03, Rev 00, Releaes 2.4 4-3Configuring Network and Session Initiation Protocol (SIP) FeaturesOverviewAn administrator can configure the IP Phone Network and SIP options from thephone UI, from the Aastra Web UI, or the configuration files. Administrator leveloptions are password protected in both the IP phone UI and the Aastra Web UI.The procedures in this section include configuring from the IP phone UI and theAastra Web UI. To configure the IP phones using the configuration files, seeAppendix A, “Configuration Parameters.”To configure the phone using the IP phone UI, you must enter an administratorpassword. To configure the phone using the Aastra Web UI, you must enter anadministrator username and password.ReferencesFor configuring the IP phone at the Asterisk IP PBX, see Appendix B,“Configuring the IP Phone at the Asterisk IP PBX.”For sample configuration files, see Appendix C, “Sample Configuration Files.”These sample files include basic parameters required to register the IP phone atthe PBX.Note: An administrator has the option of enabling and disabling the useof password protection in the IP phone UI. This is configurable using theconfiguration files only. For more information about this feature, seeAppendix A, the section “Password Settings” on page A-15.Note: In the IP phone UI, the default password is "22222". In theAastra Web UI, the default admin username is "Admin" and the defaultpassword is "22222".Draft 1
